Abstract
This paper is intended to reveal possibilities to find defects in steel ropes using dynamic properties of tensed steel rope in special test rig. For this purpose special test rig was designed and build. During experimental test rope dynamic properties was estimated depending from excitation frequency, also including influence of frame dynamic properties. Finally, results are given and conclusions are made
About this article
Received
02 November 2010
Accepted
09 December 2010
Published
31 December 2010
Keywords
rope
defects
diagnostics
dynamical properties
Copyright © 2010 Vibroengineering
This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.