Abstract
This work considers the modeling of thermal airflow. The dynamic airflow is spit on flat circular elements. The extrapolation method, which is referred to as adaptive extrapolation, is proposed. The extrapolation which is influenced by stochastically changing settings is the key for adaptive extrapolation. The change of these parameters is determined experimentally during real flight or using prediction techniques. This paper presents modeling with preset parameters. The thermal airflow is modeled by taking into account its inclination towards wind and the change of diameter in accordance with linear and nonlinear laws.
About this article
Received
15 January 2012
Accepted
14 February 2012
Published
31 March 2012
Keywords
thermal airflow
thermal modeling
finite elements
circular finite elements
interpolation
adaptive extrapolation
delay time
Copyright © 2012 Vibroengineering
This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.