Abstract
The non-symmetrical twelve poles active magnetic bearing (AMB12) actuator has been considered. We also included the control system for the computer simulation. We have used the field-circuit method modeling included under various speed of the rotor. The electromechanical equation system has been solved taking into account the integral parameters obtained from Finite Element Method (FEM) analysis of the magnetic field. We verified the calculations by the measurement tests under various values of the rotational speed of the AMB rotor. A good agreement has been achieved.
About this article
Received
11 September 2011
Accepted
14 February 2012
Published
31 March 2012
Keywords
field-circuit method
active magnetic bearing
digital control system
Copyright © 2012 Vibroengineering
This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
