Abstract
The paper presents a simple friction model containing two parts: dry and viscous friction. Friction model is built inside the model of the guiding device of a mechanical system consisting of a mass, linear spring and damper. System is excited by the movement of the base. Main idea of the presented algorithm is to split up the solution into several parts, which follow one after another in time, and to combine their results subsequently.
About this article
Received
03 September 2011
Accepted
04 December 2011
Published
31 December 2011
Keywords
vibrations
mechanical system
dry friction
software implementation of friction model
Matlab
Copyright © 2011 Vibroengineering
This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
