Abstract
It is important to possess information about static characteristics of pipe fastening elements in order to achieve good vibro-isolation parameters. Static characteristics of the same fastening element may change with regard to applied clamping force, rubber relaxation phenomenon or other reasons. Measurement system for determination of static characteristics of pipe fastening elements was developed and multiple measurements were performed. Results confirm relevance of such experiments
About this article
Received
29 September 2009
Accepted
27 November 2009
Published
31 March 2010
Keywords
pipe vibrations
static measurement
fastening element
Copyright © 2010 Vibroengineering
This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
