Abstract
Performance of negative-stiffness vibroisolating table „Minus K500BM-1“ was analyzed in a frequency range of 2-110 Hz. The paper also reviewed other possible ways of vibroisolation. Performed experimental vibrations transmissibility tests were reported as well. A special vibration excitation equipment was tested in research facilities. Subsequently, experimental test methods were described together with presentation of results and conclusions of experimental analysis
About this article
Received
30 June 2010
Accepted
10 September 2010
Published
30 September 2010
Keywords
negative-stiffness
payload
“HVAC” systems
actuators
elastomers
Copyright © 2010 Vibroengineering
This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
