Abstract
The paper deals with the investigation of laser scanning instrument‘s possibility to be used for determination of the angular position or displacement of the object. Laser scanners are used widely in geodesy, structural and machine engineering areas. Such application gives new opportunities for measurement of an angle position of object in such places and positions, where usually used angle measuring instruments are not available or not possible to use. In this paper the determination of angular position of rotary device by means of plate freely placed on the rotating part and the laser scanning instrument is presented together with some experimental results of such layout application
About this article
Received
03 December 2009
Accepted
07 June 2010
Published
30 June 2010
Keywords
angle
displacement
determination
laser scanner
Copyright © 2010 Vibroengineering
This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
